Markbass Little Mark Tube 800 Bass Amp Head Overview
The Little Mark Tube solves the "tube or solid state" dilemma. The Little Mark Tube 800 goes a step further by also addressing that other perennial concern, "Will I have enough power?" The 800 watts from this powerful amp will satisfy any thirst for power, and the two blendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp... or a mix of both!- Specifications:
- INPUTS
- INPUT 1
- impedance 500 Kohm, max. voltage 15 Vpp
- INPUT 2 (Balanced XLR/1/4" combo)
- balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
- EFFECT RETURN
- impedance 33 Kohm, max. voltage 10 Vpp
- CONTROLS
- GAIN 1
- -60 dB to 23 dB range
- GAIN 2
- MIX
- mixes tube and solid state gain
- MASTER VOLUME
- LINE OUT LEVEL
- GROUND LIFT
- switch on rear panel
- PRE/POST EQ
- MUTE
- push/pull on gain knob
- EQUALIZATION
- LOW
- center frequency: 60 Hz; level: ±16 dB
- LOW MID
- center frequency: 360 Hz, level: ±16 dB
- HIGH MID
- center frequency: 800 Hz, level: ±16 dB
- HIGH
- center frequency: 5 kHz, level: ±16 dB
- VPF (Variable Pre-shape Filter)
- center frequency 380 Hz (cut)
- VLE (Vintage Loudspeaker Emulator)
- frequency range 250 Hz-20 kHz (cut)
- OUTPUT
- LINE OUT
- balanced XLR, max. voltage 20 Vpp
- EFFECT SEND
- unbalanced, max. voltage 20 Vpp (pre-EQ)
- TUNER OUT
- unbalanced, max. voltage 2 Vpp
- SPEAKER OUT
- speakon/1/4" combo, 1/4"
- OTHER
- WEIGHT
- 6.31 lbs / 2.86 kg
- DEPTH
- 10.1 in. / 25.6 cm
- WIDTH
- 10.87 in. / 27.6 cm
- HEIGHT
- 2.8 in. / 7.1 cm
- OUTPUT POWER
- 500W RMS @ 8 ohm, 800W RMS @ 4 ohm
- POWER REQUIREMENT
- 100/120V; 230V; 240V
- 50/60Hz
- (Voltage is factory preset according to region of sale)
